DUNTON N W CO -- NOKORODE SOLDERING PASTE -- 3439-00-900-3654
===================== Product Identification ===================== Product ID:NOKORODE SOLDERING PASTE MSDS Date:12/27/1990 FSC:3439 NIIN:00-900-3654 === Responsible Party === Company Name:DUNTON N W CO Address:3 BRIDAL AVE City:WEST WARWICK State:RI ZIP:02893-2901 Country:US Info Phone Num:401-821-1832 Emergency Phone Num:401-821-1832 CAGE:81397 === Contractor Identification === Company Name:DUNTON N W CO Address:3 BRIDAL AVE Box:City:WEST WARWICK State:RI ZIP:02893-2901 Country:US Phone:401-821-1832 CAGE:81397 ============= Composition/Information on Ingredients ============= Ingred Name:ZINC CHLORIDE (SARA III) CAS:7646-85-7 RTECS #:ZH1400000 Fraction by Wt: 10-25% Other REC Limits:NONE SPECIFIED OSHA PEL:1 MG/M3/2 STEL ACGIH TLV:1 MG/M3/2STEL FUME93 EPA Rpt Qty:1000 LBS DOT Rpt Qty:1000 LBS Ingred Name:AMMONIUM CHLORIDE (SARA III) CAS:12125-02-9 RTECS #:BP4550000 Fraction by Wt: 10-25% Other REC Limits:NONE SPECIFIED OSHA PEL:10 MG/M3/20 STEL ACGIH TLV:10 MG/M3 FUME; 9192 EPA Rpt Qty:5000 LBS DOT Rpt Qty:5000 LBS Ingred Name:GREASE, PETROLEUM CAS:8009-03-8 Fraction by Wt: <80% Other REC Limits:NONE SPECIFIED ===================== Hazards Identification ===================== Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:CAUSES BURNS. FUMES, DUST, OR MIST MAY CAUSE INJURY TO THE RESPIRATORY TRACT. SEVERE EXPOSURE MAY CAUSE LUNG DAMAGE. THE COMPOUND, IN EITHER SOLID OR SOLUTION FORM, IS CORROSIVE TO THE EYES AND SKIN. TOXIC EFFECTS ARE LOWER RESPIRATORY IRRITATION WITH PULMONARY EDEMA. Effects of Overexposure:EYE IRRITATION WITH DISCOMFORT, TEARING, OR BLURRING OF VISION. SKIN IRRITATION WITH DISCOMFORT OR RASH. SKIN BURNS OR ULCERATION. TEMPORARY LUNG IRRITATION EFFECTS WITH COUGH, DISCOMFORT, DIFFICULTY BREATHING, OR SHORTNESS OF BREATH. Medical Cond Aggravated by Exposure:INDIVIDUALS WITH PREEXISTING DISEASES OF THE LUNGS MAY HAVE INCREASED SUSCEPTIBILITY TO THE TOXICITY OF EXCESSIVE EXPOSURES. ======================= First Aid Measures ======================= First Aid:CALL A PHYSICIAN IMMEDIATELY IN ALL CASES. EYES: FLUSH WITH WATER FOR 15 MINUTES, INCLUDING UNDER EYELIDS. SKIN: FLUSH WITH WATER AND SOAP. INGESTION: GIVE PLENTY OF WATER OR MILK. DO NOT INDUCE VO MITING. INHALATION: MOVE TO FRESH AIR. ===================== Fire Fighting Measures ===================== Flash Point Method:COC Flash Point:399F,204C Extinguishing Media:FOAM, SAND OR CARBON DIOXIDE. Fire Fighting Procedures:IF LARGE QUANTITIES ARE INVOLVED IN A FIRE, FIREFIGHTERS SHOULD USE SELF-CONTAINED BREATHING APPARATUS AND PROTECTIVE CLOTHING. Unusual Fire/Explosion Hazard:WHEN HEATED, THE MATERIAL MAY RELEASE ZINC CHLORIDE AND ZINC OXIDE FUMES. ================== Accidental Release Measures ================== Spill Release Procedures:NEUTRALIZE AND PLACE IN CONTAINER FOR DISPOSAL. Neutralizing Agent:SODIUM CARBONATE OR TRI-SODIUM PHOSPHATE. ====================== Handling and Storage ====================== Handling and Storage Precautions:FLUX IS A STABLE MATERIAL IN CLOSED CONTAINERS AT ROOM TEMPERATURE UNDER NORMAL STORAGE AND HANDLING CONDITIONS. Other Precautions:NONE ============= Exposure Controls/Personal Protection ============= Respiratory Protection:USE FUME OR AIR-SUPPLIED RESPIRATOR WHEN SOLDERING IN CONFINED NON-VENTILATED SPACES. Ventilation:LOCAL EXHAUST DURING SOLDERING AT THE FLAME SO AS TO CAPTURE ALL GASES AND FUMES. Protective Gloves:RUBBER FOR SENSITIVE INDIVIDUALS. Eye Protection:GOGGLES OR FACE SHIELD. Other Protective Equipment:HEAD AND BODY PROTECTION WILL HELP TO PREVENT INJURY FROM SPLASHING OR FROM FLAMES. Work Hygienic Practices:WASH HANDS THOROUGHLY AFTER HANDLING THIS MATERIAL. Supplemental Safety and Health NONE ================== Physical/Chemical Properties ================== HCC:N1 Melt/Freeze Pt:M.P/F.P Text:120F,49C Spec Gravity:1.06 Solubility in Water:INSOLUBLE Appearance and Odor:TAN/GOLD TO BLACK PASTE, NO APPRECIABLE ODOR. Percent Volatiles by Volume:00 ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES MATERIAL MAY BE INCOMPATIBLE WITH NYLON AND/OR CELCON. CYANIDES MAY RELEASE HCN GAS WHEN MIXED WITH ZINC CHLORIDE. Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER. Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER. ==================== Disposal Considerations ==================== Waste Disposal Methods:FLUSH OR SHOVEL TO CHEMICAL WASTE DISPOSAL ACCORDING TYO FEDERAL, STATE, AND LOCAL REGULATIONS. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.